changed imersion element

2 Replies

had an element changed in my hot water tank and now the hot water pressure is very low  its a gravity fed system no pump and no expansion tank will it be debris in a pipe or something else i drained the tank and turned the cold supply of while i changed it .Dont know why no hot water pressure

Featured Classified


scubasteve-691782 1514038120

It will be air in the system you don't normally drain tank. just run all the taps that should get the air out

elvalle 1515745184

If it still doesn't clear try connecting a hose between the hot and cold taps and open them both up. This might help force the airlock out of the hot side of the system.

Join the discussion